Products

Pdlux is one of Microwave Sensor Module, PIR Motion Sensor, Microwave Motion Lamps Manufacturers and Suppliers in China. We are committed to improving the quality of our products and optimizing after-sales services. Over the years, we have developed customers all over the world and won unanimous praise.

  • PDLUX PD-V18-M1 Millimeter Wave Sensor

    PDLUX PD-V18-M1 Millimeter Wave Sensor

    The PDLUX PD-V18-M1 Millimeter Wave Sensor is an application module consisting of a super millimeter wave sensor and an amplification circuit + MCU designed for non-contact control. It can also be called a controller module for close-range wave sensing. Its application scenarios are very extensive, you can control the electrical work or turn off with a wave of your hand at different angles of 10-30cm, and you can even generate different productions with the number of swings. For example: one swing to open the electric door; two swings to open the lighting system. Especially after the baptism of the epidemic, people have a heartfelt resistance to the public contact switch. It is for this reason that we have developed a wave sensor system, which can also be applied to similar electrical and electronic products, so you can have more room for imagination.

    Read More
  • PDLUX PD-V10-G5 Miniature X-Band Microwave Transceiver

    PDLUX PD-V10-G5 Miniature X-Band Microwave Transceiver

    The PDLUX PD-V10-G5 miniature X-Band microwave transceiver is a miniature X-Band microwave transceiver that utilises the Doppler shift phenomenon to "sense" motion. The unit, housed in a metal can, features a dielectric resonator stabilised oscillator, which provides stable operation over a broad temperature range in either CW or low duty cycle pulse mode and an integrated homodyne receiver for enhanced sensitivity and reliability. This module family is available with either a +5v or +3v supply voltage.

    Read More
  • PDLUX PD-V11 Automatic Door 24GHz Microwave Sensor Module

    PDLUX PD-V11 Automatic Door 24GHz Microwave Sensor Module

    PDLUX PD-V11 Automatic Door 24GHz Microwave Sensor Module is K-band doppler transceiver module. Automatic Door 24GHz Microwave Sensor Module is a flat antenna of our own design develop a layout with well-matched transmissions and receptions.

    Read More
  • PDLUX PD-V8-S 360° 5.8GHz Mobile Detection Microwave Sensor Module

    PDLUX PD-V8-S 360° 5.8GHz Mobile Detection Microwave Sensor Module

    PDLUX PD-V8-S 360° 5.8GHz Mobile Detection Microwave Sensor Module is a C-Band Bi-Static Doppler transceiver module. It's built-in Resonator Oscillator (CRO).This module,V8-S adopts flat Plane Antenna, suitable for wall mounting. 360° 5.8GHz Mobile Detection Microwave Sensor Module can improve its front signal receiving ability and reduce its flank blind area. Its performance is better than the sensors in the market.

    Read More
  • Dual PCA Design Microwave Motion Sensor

    Dual PCA Design Microwave Motion Sensor

    PD-MV1019-Z is Dual PCA Design Microwave Motion Sensor that can detect range of 360°and it’s working frequency is 5.8G.The advantage of this product is stable working state (stable working temperature: -15°C~+70°C), PD-MV1019-Z adopts a microwave sensor(high-frequency output<0.2mW),so that it is safe and performs better than infrared sensor.

    Read More
  • Compound Smoke Temperature Alarm

    Compound Smoke Temperature Alarm

    The compound smoke temperature alarm is designed to sense smoke and heat that comes into the detector chamber. This smoke alarm and heat alarm is designed to give early warning of developing fires by giving off the alarm sounds from its built-in alarm horn. It can provide precious time for you and your family to escape before a fire spreads.

    Read More
  • 5.8GHz ISM band radar sensor

    5.8GHz ISM band radar sensor

    The 5.8GHz ISM band radar sensor PD-MV1029B represents a digital microwave sensor switch designed to operate with a comprehensive 360° detection coverage and a functional frequency of 5.8GHz. By harnessing the Doppler principle for signal transmission and reception, this device incorporates an MCU (microcontroller unit) within its control center. This MCU precisely computes the zero-crossing point of the sine wave within the power network, enabling the switch to operate precisely at this point. This advanced timing mechanism significantly enhances the device's shock resistance and drastically minimizes the likelihood of failures.

    Read More
  • 5.8GHz CW microwave sensor

    5.8GHz CW microwave sensor

    The 5.8GHz CW microwave sensor PD-MV1029A is a digital microwave sensing switch with a detection range of 360° and an operating frequency of 5.8GHz. The application of Doppler principle to transmit and receive signals, the control center uses MCU (micro control unit), accurately calculate the zero point of the power network sine wave, and switch at the zero point, improve the impact resistance, greatly reduce the failure rate.

    Read More