Sensor Series
Sensor Series such as the detection of human movement, the detection of mechanical movement and other object movement, people generally refer to the motion sensor refers to the electronic sensor.
Sensor Series can be used to measure motion related to the position, displacement, velocity, acceleration, vibration displacement, amplitude, wave propagation and other physical quantities.
Sensor Series are widely used in teaching simulation, scientific research, aerospace, telemetry, automation and other fields, and even in the daily life of mobile phones also used motion sensors.
Small Dual-Element SMD Binary Anti Jamming Analog Infrared Sensor
The standard quantity of each Small Dual-Element SMD Binary Anti Jamming Analog Infrared Sensor is 1000pcs. Each product is knitted in a counterclockwise direction, and the feeding hole is on the left side of the user. The label attached to each product clearly indicates the model, product quantity, production date, etc. A green ROHS label is affixed to each product.
Read More›
Two Wire Infrared Sensor
PDLUX PD-PIR123
Read More›
Two Wire Infrared Sensor can be used to control incandescent lamps. The product is also a manual switch, when you need conference rooms or other places when a slide or film programs can use this switch to turn off the lights. This product should be installed in a standard wall box to replace a single pole switch. This product requires grounding.
Remote Infrared Sensor
PDLUX PD-MV1008
Read More›
Remote Infrared Sensor is a motion sensor whose detection range is 360° and it adopts the microwave sensor(working frequency is 5.8G Hz ,transmission power:<0.2mW) together with the PIR sensor, four working state can be choosed by preessing the button which is more stable and safer performance . It can be used where the ambient temperature is about -10℃~40℃.
Embedded Infrared Sensor
PDLUX PD-PIRM20
Read More›
Embedded Infrared Sensor gathers automatism, convenient safe, saving-energy and practical functions. One detector inside compose a wide range detection field, it utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.
Ceiling Infrared Sensor
PDLUX PD-PIR101-Z
Read More›
It is a medium and high-end product. Although the cost is increased compared with the conventional version, the reliability and life of the product are greatly increased. Ceiling Infrared Sensor is equal to choosing peace of mind, and choosing safety.
Wall Infrared Sensor
PDLUX PD-PIR125-Z
Read More›
Wall Infrared Sensor is an advanced digitally controlled infrared pyroelectric intelligent sensor product. Wall Infrared Sensor uses one high-resolution sensor that is almost twice the sensitivity of a single traditional sensor. lt uses the MCU to accurately calculate the switch information, and accurately controls the relay to be turned on at the zero point of the sine wave, so that each load is turned on.
360° Detection Infrared Sensor
PDLUX PD-30N2
Read More›
360° Detection Infrared Sensor uses a digital information processing system. The easiest way to consider the 30N2 at the start of the design is to remove the front frame of the sensor and select the appropriate location for each function to be replaced.
High-power Infrared Sensor
PDLUX PD-PIR118
Read More›
High-power Infrared Sensor can identify day and night automatically. And the working light can be chosen freely and make it work at night and not work in the day time.
