Products
Pdlux is one of Microwave Sensor Module, PIR Motion Sensor, Microwave Motion Lamps Manufacturers and Suppliers in China. We are committed to improving the quality of our products and optimizing after-sales services. Over the years, we have developed customers all over the world and won unanimous praise.
LED IP65 Waterproof Microwave Induction Lamp
PDLUX PD-LED2046MDS
Read More›
This is a microwave sensor switches controlled LED IP65 Waterproof Microwave Induction Lamp,the microwave sensor was built into the light ,it has 72pcs high brightness LEDs inside ,with total power of 18 watts. When light on, the luminous flux will be more than 1050 lm, 60 watt incandescent lamp(≈400lm) and the life exceeds 50,000 hours.LED IP44 Waterproof Microwave Induction Lamp
PDLUX PD-IN2006
Read More›
When use LED IP44 Waterproof Microwave Induction Lamp, please adjust the sensitivity to an appropriate position you need, please do not adjust the sensitivity to maximum, to avoid the product does not work normally caused by wrong motion.Because the sensitivity is too high easily detect the wrong motion by wind blowing leaves & curtains, small animals, and the wrong motion by interference of power grid & electrical equipment. All those lead the product does not work normally !LED Emergency Lighting Microwave Induction Lamp
PDLUX PD-LED2040-D
Read More›
When using LED Emergency Lighting Microwave Induction Lamp, please adjust the sensitivity (detection range) to an appropriate value but the maximum to avoid the abnormal reaction caused by the easy detection of the wrong motion by the blowing leaves & curtains, small animals or the interference of power grid & electrical equipment. All the above mentioned will lead to the error reaction. When the product does not work normally, please try to lower the sensitivity appropriately, and then test it.LED Wall 180° Detects Microwave Induction Lamp
PDLUX PD-LED131
Read More›
LED Wall 180° Detects Microwave Induction Lamp comes in two configurations: an induction lamp with dual AC/DC systems for emergency management; One is a smart sensor lamp without emergency functions. Customers can choose the configuration according to their needs. It is necessary to choose emergency lights under most circumstances. Occasional power outages without lighting can cause a lot of trouble and even danger, so this product with emergency lights is a wise choice.LED Ceiling 360° Detection Microwave Induction Lamp
PDLUX PDDT-V01
Read More›
LED Ceiling 360° Detection Microwave Induction Lamp gathering intelligent & multifunction and can detect all-around,energy consumption is lower than 0.5w.In the middle of lamp holder built in 8 pcs high brightness LED. At night when the ambient light is less than 20lux ,built-in 8pcs LED Light will be works.When someone pass by ,the light on the holder will be trigger.(Such as Incandescent lamp,energy-saving lamp and LED Lamp) LED Ceiling 360° Detection Microwave Induction Lamp has multiple patents,product design is unique in the world.LED 5.8GHz Radar Doppler Microwave Induction Lamp
PDLUX PD-LED2045
Read More›
when using LED 5.8GHz Radar Doppler Microwave Induction Lamp, please adjust the sensitivity (detection range) to an appropriate value but the maximum to avoid the abnormal reaction caused by the easy detection of the wrong motion by the blowing leaves & curtains, small animals or the interference of power grid & electrical equipment. All the above mentioned will lead to the error reaction. When the product does not work normally, please try to lower the sensitivity appropriately, and then test it.Two Wire Infrared Sensor
PDLUX PD-PIR123
Read More›
Two Wire Infrared Sensor can be used to control incandescent lamps. The product is also a manual switch, when you need conference rooms or other places when a slide or film programs can use this switch to turn off the lights. This product should be installed in a standard wall box to replace a single pole switch. This product requires grounding.Remote Infrared Sensor
PDLUX PD-MV1008
Read More›
Remote Infrared Sensor is a motion sensor whose detection range is 360° and it adopts the microwave sensor(working frequency is 5.8G Hz ,transmission power:<0.2mW) together with the PIR sensor, four working state can be choosed by preessing the button which is more stable and safer performance . It can be used where the ambient temperature is about -10℃~40℃.