PDLUX PD-V12 24GHz Millimeter Wave Radar Sensor Module
Application of PDLUX PD-V12 24GHz Millimeter Wave Radar Sensor Module
• Intelligent switch
• Wall-hung switch
• Intruder detect
Antenna Beam Pattern
PDLUX PD-V12 24GHz Millimeter Wave Radar Sensor Module is a K-Band Bi-Static Doppler transceiver modlue. Ifs built-in Resonator Oscillator (CRO).This module, PD-V12 adopts flat Plane Antenna, suitable for wall mounting. It can improve its front signal receiving ability and reduce its flank blind area. Its performance is better than the sensors in the market.
This module is ideally suiable for occupancy sensor in automatic lighting switches.lt can also be used for ceiling mount intruder detectors.
According with EN 300440-V2.1.1、EN 62479：2010,
According with FCC Part 15.249
Size of PDLUX PD-V12 24GHz Millimeter Wave Radar Sensor Module
|Operation Mode||Powered by PWM, it can control the working current at 3-15mA|
|Operating Temperature||Top||-30~+85 +100 (Max.)||8C|
|Radiated Power (EIRP)||Pout||<2.0||<2.5||<3.0||mW|
|Storage Ambient Humidity||45%~65%||RH|
WARNING of PDLUX PD-V12 24GHz Millimeter Wave Radar Sensor Module: The actual detection range is related to the signal amplification gain of the circuit, the overall layout of the PCBA
and the threshold of the MCU.
Note1: The radiated emissions is designed to meet FCC and CE rules.
Note2: The Received Signal Strength(RSS) is measured at the total 1 Ways path loss of 70dB.
Note3: The noise voltages are measured from 10Hz to 100Hz at the Output port, inside an Anechoic chamber.
Note4: Pulse operation